Šlápněte na plyn!

Zítra prosím přineste vše, co máte hotové i rozpracované. Probereme odevzdání, které vás čeká příští pátek, předběžně můžete počítat s níže nakopírovaným:

Turn-in requirements (2)

a) Name of atelier, program (phase), student and date according to a template prepared by the staff.

b) Concept sketch with name of your design and spatial organization demonstration, explanatory annotated sketches, design history if relevant, etc (two A3 formats)



c) Plans, 2 relevant sections and 4 elevations 1:50
 Nápomocný může být "Dimensional code":
Outside walls are 40 cm thick, wether load-bearing or not;
Windows 15 cm
Inside load-bearing walls are 20 cm thick;
Inside non-load bearing walls are 10 cm thick;
Floor slabs are 25 cm thick (mezzanine floor may be thiner):
Roof slab is 45 cm thick (except exterior overhangs or balconies which may be thinner)

Drawing:
Drawings may be computer or by hand, both with professional quality.
All cut load bearing elements are black
All cut non-load bearing elements are in dark grey
On facades and in section glazing is to be shaded light grey.
Each drawing in plan, section and elevation will include at least one person in motion or at rest, carefully outlined to scale (no templates or web-imports).

d) Model 1:50, This is the smallest scale where you begin to be able to mentally and visually « visit » the interior of an architectural model.
Each pavilion model is presented on a flat circular base (Diameter 60 cm) painted black 10-15 mm thick (or a box in case if there is a basement). It will be very carefully built and opening sideways like a book along the most relevant section to see the inside in section once extracted from its base. The possibility to extract it is also a necessity in view of the forthcoming exercise (grouping).
The model will be of neutral color (=white) to allow a more adequate estimation of
spatial organization and light distribution.

e) Perspective replaced by two good photographs of the model (one A3).